Environment
LC3 (Limestone Calcined Clay Cement)
Definition
Limestone Calcined Clay Cement (LC3) is a ternary blended cement in which calcined clay and ground limestone jointly substitute around 50% of Portland clinker (typical LC3-50 formulation: 50% clinker, 30% calcined clay, 15% limestone, 5% gypsum). It achieves roughly 30–40% lower CO₂ emissions than ordinary Portland cement with comparable mechanical performance, and can be produced in existing plants.
References
Supports definition and framing.
Supports definition and framing.
Overview
What it means
Clinker production is the source of most cement emissions (cement accounts for roughly 8% of global CO₂), so deep clinker substitution is the sector's principal near-term decarbonisation lever. Calcined clay fires at about 800 °C rather than clinker's ~1450 °C, and both clay and limestone are abundant — including low-grade clays — making LC3 scalable where traditional substitutes (fly ash, slag) are declining.
LC3 was recognised in European standard EN 197-5:2021 (cement type II/C-M) and shows strong chloride resistance, aiding durability in coastal structures.
How it is used
LC3 is entering commercial production, promoted by the EPFL-led LC3 Project with Swiss development funding, and is assessed in procurement, codes and life-cycle assessments as a Portland-cement alternative.
Why it matters
It is one of the few immediately scalable, cost-effective routes to deep cuts in construction-sector emissions.